Hotline:86 373 4555288
  • Address:South Fenghuang Avenue,Huojia,Xinxiang,Henan,China
  • Telephone:86373 4555288
  • Fax:86373 4556178
  • Linkman:Manager Fang
  • Mobile:86 13949622388
  • Email:zhiliankejia@163.com
  • Website:http://www.insite14.com
  • Product

WNFP-100cm Width Length 100M

WNFP-100cm Width Length 100M

Filter paper produced by Xinxiang City- Link Technology Co., Ltd. is made from pure chemical fiber and adopt wet process.The production’s fiber is evenly distributed,vertical and horizontal tension difference is small and can withstand acid, alkali, oil, water , high temperature ( below 130 ℃can be prolonged use ).Compared with the filter paper used in dry production process of melt-blown , spun-bond production,high Precision filter paper’s fiber distributed more evenly,and  distribution , micro pore size is more consistent.Therefore ,the low-weight wet paper can be used in place of high-weight dry filter paper.In this way,not only the quality of filter can be improved,but also the costs of the production can be reduced. It can be widely used in grinding fluid , emulsion filtration , drawing oil , insulating oil , grinding oil, industrial oil filter and also  be used in air filtration or other solid-liquid separation filtration and other filtration industries .

 

: metal cutting fluid filtration , grinding fluid filtration , wire drawing oil filtration ,Rolling oil filtration , grinding fluid filtration , lubricating oil filtration,insulating oil filtration and other industrial oil filtration.

 

characteristics:

 

1 . Tensile strength, low coefficient of variation,advanced technology of web forming process, Molding reinforcement, so that enhance tensile strength and stable and maintain a strong initial strength consistent with the initial intensity .

 

2 . High precise filtration,high efficiency usage,Using polyester fiber combined with polyethylene polymer film, filter material selected can meet the user-specified requirements on accuracy .

 

3 . Cutting fluid cannot corrode filter material we choose, Do not change the chemical nature of the cutting fluid,can normally be used from -40 °C to 120 ° C.

 

4 . Filter material we choose can withstand mechanical forces and temperature,and the fracture strength of filter material used in Cutting fluid will not reduce in wet state.

 

5. Filter material with a little big porosity, low filtration resistance,greater throughput;strong sink capacity,high filtration efficiency , long service life, reduce filter consumption and reduce filtration costs.

 

Advantages  :

 

1 used for vacuum paper tape filter, Hoffman accuracy range tape machines and gravity filter.and its precision is from 7μm to 50μm.

 

2 can be customized for cutting a variety of filter material , roll width range : 200mm-2500mm.

 

3 There are a variety of diameters and a variety of roll paper tube diameter;filter paper thickness 0.12mm-0.49mm, weight 18g /  -100g /  .

 

4 Filtered material in general are: polyester, polypropylene, rayon, polyester and cellulose blends and the like.

 

5 Wet tensile strength requirements of filter paper in the filtration process are high,besides should have a sufficient strength to pull and bear not only its own weight , but also the weight of the filter cake covered on the surface and the force of the chain’s friction.

 

6 Here are some should considered: required filter accuracy when selecting filter paper,specific types of filtration equipment,the temperature of the coolant, pH and so on.

 

7 . Filter paper roll requires no joints to avoid pulling off the filter paper and cause penetration of impurities when in the filtration process.

pc蛋蛋 pc蛋蛋开户 河北快三 河北快三 广西快3走势图 河北快3平台 pc蛋蛋 pc蛋蛋 pc蛋蛋网站 pc蛋蛋注册